Heavy-Duty Guardrails

Protect your employees and your work environment with our guardrails

To ensure workplace safety, our guardrails and safety rails can stop unfortunate situations before they happen. Easy to install, rugged and cost-effective, our guardrails are the ideal solution for protecting your employees around machinery, shelving, inventory storage areas and loading docks.

Avoid the enormous costs of damages and compensation with resistant guardrails that allow you to define safe zones, direct traffic, prevent accidents and protect your equipment and your facilities. With such a safe, well-controlled environment, not only will your employees be more secure, but you’ll also enjoy greater peace of mind.

With such a safe, well-controlled environment, not only will your employees be more secure, but you’ll also enjoy greater peace of mind.

You will receive your industrial-quality protective guardrails and safety rails quickly, because we keep them in stock and they are made in Quebec. Consult our security catalogue below.

Examples of typical usage of our heavy-duty protection guardrails:

Equipment safety guardrail in a factory

Workstation protection Guardrail

Guardrail for equipment safety in a warehouse

Loading dock protection bollards

Pedestrian barriers for traffic control

Restroom area protection guardrail

Opt for a guardrail system and create a protective shield between your employees and your equipment.
Our Pedlex space optimization experts will support you during the design, choice
of products and installation. We deliver and install in Montreal and Quebec.

Guardrail rails in stock
Guardrail columns in stock
Lift-out brackets for removable heavy-duty guardrails

How to order
Safety bollards

Guardrail rails in stock:

Our heavy-duty guardrails are engineered to withstand a 10,000 lb. impact at 4 mph (given a proper installation)
Standard lengths: from 2′ to 10′ center-to-center (exact dimensions from 19″ to 115″. We also offer custom lengths
Height: 12″. (Total height: 12-1/2″ including the end plates)
Width : 3″. (Total width: 3-1/4″ including the end plates)
Made of roll-formed 13-gauge structural corrugated steel, our heavy-duty rails meet the requirements indicated by the ASTM A607 Grade 50
The finish is a powder-coated safety yellow paint
The standard rails are welded to two 12-1/2” x 3” plates on each side. These plates are punched with two 9/16” connection holes and bolted to the column using Ø1/2” x 7” carriage bolts.

IN STOCK - RAILS (12" HIGH)	NOMINAL LENGTH	ACTUAL LENGTH	WEIGHT	MODEL #
2 ft. Heavy Duty Guardrail Crossbar	2'-0"	1'-7" (19")	19 lbs	GR2
3 ft. Heavy Duty Guardrail Crossbar	3'-0"	2'-7" (31")	25 lbs	GR3
4 ft. Heavy Duty Guardrail Crossbar	4'-0"	3'-7" (43")	32 lbs	GR4
5 ft. Heavy Duty Guardrail Crossbar	5'-0"	4'-7" (56")	38 lbs	GR5
6 ft. Heavy Duty Guardrail Crossbar	6'-0"	5'-7" (67")	45 lbs	GR6
7 ft. Heavy Duty Guardrail Crossbar	7'-0"	6'-7" (79")	50 lbs	GR7
8 ft. Heavy Duty Guardrail Crossbar	8'-0"	7'-7" (91")	59 lbs	GR8
9 ft. Heavy Duty Guardrail Crossbar	9'-0"	8'-7" (103")	67 lbs	GR9
10 ft. Heavy Duty Guardrail Crossbar	10'-0"	9'-7" (115")	72 lbs	GR10

Guardrail columns in stock:

We offer 2 types of columns – single rail (18” tall) or double rail (44” tall). Both are made from 5” x 5” x 1/8” thick steel and are welded to a baseplate.

Columns are punched with 2 holes of 3/4”ø on each side and are topped with a blast plastic cap on top. The 10” x 10” x 1/2” baseplates are punched with 4 holes of 3/4”ø for floor anchors. Powder-coated safety yellow paint finish..

Column with 1 rail 18″ total height (17″ to top of rail)

Column with 2 rails 44″ total height (42″ to top of rail)

Baseplates: centered and offset dimensions 10″W x 10″L

IN STOCK - AMOUNTS	HEIGHT	ACTUAL LENGTH	WEIGHT
Line post for single crossbar	18"	27 lbs	GPSC
Corner post for single crossbar	18"	27 lbs	GPSO
Line post for double crossbar	44"	45 lbs	GPDC
Corner post for double crossbar	44"	45 lbs	GPDO
4 ground anchors of 5/8''Ø	4 1/2''	-	AN58450
Plastic cap on top	5"P x 5"L	-	GP2

Lift-out brackets for removable heavy-duty guardrails

The lift-out brackets allow the rails to be lifted out and permit passage of forklifts etc, rather than being bolted to the posts. Their model # is GL1.

The lift-out brackets are sold in pairs, one for each side of the guardrail. The brackets are attached to the column using 5/16”Ø x 5 1/2” carriage bolts with a washer and “T” nut.

Here is a view from the side and in detail:

EN STOCK - SUPPORT	DIMENSIONS	POIDS	MODÈLE #
Paire de support pour traverse amovible	13"H x 3 5/8"L	18 lbs	GL1

How to order

Discover a sample corner system with double rails, which requires 5 columns and 8 rails:

Safety bollards

Our resistant safety bollards are made of 1/8” thick cylindrical steel welded to a baseplate. We carry in stock 42” high standard bollards which are 4 ½” in diameter and welded to a 10” x 10” x ½” thick base plate with 4 punched holes of 3/4”ø placed 1 ½” from the edge of each corner.

We can also offer 2 other standard heights : 24” and 36”, as well as oversized bollards which are 6” in diameter and welded to a 12” x 12” x ½” thick baseplate for even more heavy-duty protection.

All bollards are finished with a durable, powder coated safety yellow paint and topped with a black plastic cap. Bolted to the floor using 5/8” ø x 4 ½” floor anchors.